J-B Weld 8265-S Original Cold-Weld Formula Steel Reinforced Epoxy, 2-Part

The Original Cold-Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 degree F when fully cured.

• Original Cold-Weld formula
• Two separate 1 oz tubes onto a mixing surface & mix thoroughly with a putty knife or similar tool
• Cures in 24 hours & when cured it will withstand temperatures of 600 degrees
• Waterproof
• Petroleum, chemical & acid resistant
• Can be drilled, tapped, machined, filed, sanded & painted
• With a tensile strength of 3960 PSI
• Perfect solution for any heavy duty adhesive job
• Works on just about any surface including iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood & most plastics.

Use On:

• Automotive
• Brick
• Concrete
• Epoxy & Adhesives
• Fiberglass
• J-B Weld
• Metal
• And More

Great For:

• Household Repairs
• Automotive
• Plumbing
• Marine
• Crafts & More

Instructions:

• Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
• Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
• Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
• Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.